Skip to content

When working with data you must:

  • Figure out what you want to do.

  • Describe those tasks in the form of a computer program.

  • Execute the program.

The dplyr package makes these steps fast and easy:

  • By constraining your options, it helps you think about your data manipulation challenges.

  • It provides simple “verbs”, functions that correspond to the most common data manipulation tasks, to help you translate your thoughts into code.

  • It uses efficient backends, so you spend less time waiting for the computer.

This document introduces you to dplyr’s basic set of tools, and shows you how to apply them to data frames. dplyr also supports databases via the dbplyr package, once you’ve installed, read vignette("dbplyr") to learn more.

Data: starwars

To explore the basic data manipulation verbs of dplyr, we’ll use the dataset starwars. This dataset contains 87 characters and comes from the Star Wars API, and is documented in ?starwars

dim(starwars)
#> [1] 87 14
starwars
#> # A tibble: 87 × 14
#>   name       height  mass hair_color skin_color eye_color birth_year sex  
#>   <chr>       <int> <dbl> <chr>      <chr>      <chr>          <dbl> <chr>
#> 1 Luke Skyw…    172    77 blond      fair       blue            19   male 
#> 2 C-3PO         167    75 NA         gold       yellow         112   none 
#> 3 R2-D2          96    32 NA         white, bl… red             33   none 
#> 4 Darth Vad…    202   136 none       white      yellow          41.9 male 
#> # ℹ 83 more rows
#> # ℹ 6 more variables: gender <chr>, homeworld <chr>, species <chr>,
#> #   films <list>, vehicles <list>, starships <list>

Note that starwars is a tibble, a modern reimagining of the data frame. It’s particularly useful for large datasets because it only prints the first few rows. You can learn more about tibbles at https://tibble.tidyverse.org; in particular you can convert data frames to tibbles with as_tibble().

Single table verbs

dplyr aims to provide a function for each basic verb of data manipulation. These verbs can be organised into three categories based on the component of the dataset that they work with:

  • Rows:
    • filter() chooses rows based on column values.
    • slice() chooses rows based on location.
    • arrange() changes the order of the rows.
  • Columns:
    • select() changes whether or not a column is included.
    • rename() changes the name of columns.
    • mutate() changes the values of columns and creates new columns.
    • relocate() changes the order of the columns.
  • Groups of rows:

The pipe

All of the dplyr functions take a data frame (or tibble) as the first argument. Rather than forcing the user to either save intermediate objects or nest functions, dplyr provides the %>% operator from magrittr. x %>% f(y) turns into f(x, y) so the result from one step is then “piped” into the next step. You can use the pipe to rewrite multiple operations that you can read left-to-right, top-to-bottom (reading the pipe operator as “then”).

Filter rows with filter()

filter() allows you to select a subset of rows in a data frame. Like all single verbs, the first argument is the tibble (or data frame). The second and subsequent arguments refer to variables within that data frame, selecting rows where the expression is TRUE.

For example, we can select all character with light skin color and brown eyes with:

starwars %>% filter(skin_color == "light", eye_color == "brown")
#> # A tibble: 7 × 14
#>   name       height  mass hair_color skin_color eye_color birth_year sex  
#>   <chr>       <int> <dbl> <chr>      <chr>      <chr>          <dbl> <chr>
#> 1 Leia Orga…    150    49 brown      light      brown             19 fema…
#> 2 Biggs Dar…    183    84 black      light      brown             24 male 
#> 3 Padmé Ami…    185    45 brown      light      brown             46 fema…
#> 4 Cordé         157    NA brown      light      brown             NA NA   
#> # ℹ 3 more rows
#> # ℹ 6 more variables: gender <chr>, homeworld <chr>, species <chr>,
#> #   films <list>, vehicles <list>, starships <list>

This is roughly equivalent to this base R code:

starwars[starwars$skin_color == "light" & starwars$eye_color == "brown", ]

Arrange rows with arrange()

arrange() works similarly to filter() except that instead of filtering or selecting rows, it reorders them. It takes a data frame, and a set of column names (or more complicated expressions) to order by. If you provide more than one column name, each additional column will be used to break ties in the values of preceding columns:

starwars %>% arrange(height, mass)
#> # A tibble: 87 × 14
#>   name       height  mass hair_color skin_color eye_color birth_year sex  
#>   <chr>       <int> <dbl> <chr>      <chr>      <chr>          <dbl> <chr>
#> 1 Yoda           66    17 white      green      brown            896 male 
#> 2 Ratts Tye…     79    15 none       grey, blue unknown           NA male 
#> 3 Wicket Sy…     88    20 brown      brown      brown              8 male 
#> 4 Dud Bolt       94    45 none       blue, grey yellow            NA male 
#> # ℹ 83 more rows
#> # ℹ 6 more variables: gender <chr>, homeworld <chr>, species <chr>,
#> #   films <list>, vehicles <list>, starships <list>

Use desc() to order a column in descending order:

starwars %>% arrange(desc(height))
#> # A tibble: 87 × 14
#>   name       height  mass hair_color skin_color eye_color birth_year sex  
#>   <chr>       <int> <dbl> <chr>      <chr>      <chr>          <dbl> <chr>
#> 1 Yarael Po…    264    NA none       white      yellow            NA male 
#> 2 Tarfful       234   136 brown      brown      blue              NA male 
#> 3 Lama Su       229    88 none       grey       black             NA male 
#> 4 Chewbacca     228   112 brown      unknown    blue             200 male 
#> # ℹ 83 more rows
#> # ℹ 6 more variables: gender <chr>, homeworld <chr>, species <chr>,
#> #   films <list>, vehicles <list>, starships <list>

Choose rows using their position with slice()

slice() lets you index rows by their (integer) locations. It allows you to select, remove, and duplicate rows.

We can get characters from row numbers 5 through 10.

starwars %>% slice(5:10)
#> # A tibble: 6 × 14
#>   name       height  mass hair_color skin_color eye_color birth_year sex  
#>   <chr>       <int> <dbl> <chr>      <chr>      <chr>          <dbl> <chr>
#> 1 Leia Orga…    150    49 brown      light      brown             19 fema…
#> 2 Owen Lars     178   120 brown, gr… light      blue              52 male 
#> 3 Beru Whit…    165    75 brown      light      blue              47 fema…
#> 4 R5-D4          97    32 NA         white, red red               NA none 
#> # ℹ 2 more rows
#> # ℹ 6 more variables: gender <chr>, homeworld <chr>, species <chr>,
#> #   films <list>, vehicles <list>, starships <list>

It is accompanied by a number of helpers for common use cases:

starwars %>% slice_head(n = 3)
#> # A tibble: 3 × 14
#>   name       height  mass hair_color skin_color eye_color birth_year sex  
#>   <chr>       <int> <dbl> <chr>      <chr>      <chr>          <dbl> <chr>
#> 1 Luke Skyw…    172    77 blond      fair       blue              19 male 
#> 2 C-3PO         167    75 NA         gold       yellow           112 none 
#> 3 R2-D2          96    32 NA         white, bl… red               33 none 
#> # ℹ 6 more variables: gender <chr>, homeworld <chr>, species <chr>,
#> #   films <list>, vehicles <list>, starships <list>
  • slice_sample() randomly selects rows. Use the option prop to choose a certain proportion of the cases.
starwars %>% slice_sample(n = 5)
#> # A tibble: 5 × 14
#>   name       height  mass hair_color skin_color eye_color birth_year sex  
#>   <chr>       <int> <dbl> <chr>      <chr>      <chr>          <dbl> <chr>
#> 1 Ayla Secu…    178  55   none       blue       hazel             48 fema…
#> 2 Bossk         190 113   none       green      red               53 male 
#> 3 San Hill      191  NA   none       grey       gold              NA male 
#> 4 Luminara …    170  56.2 black      yellow     blue              58 fema…
#> # ℹ 1 more row
#> # ℹ 6 more variables: gender <chr>, homeworld <chr>, species <chr>,
#> #   films <list>, vehicles <list>, starships <list>
starwars %>% slice_sample(prop = 0.1)
#> # A tibble: 8 × 14
#>   name       height  mass hair_color skin_color eye_color birth_year sex  
#>   <chr>       <int> <dbl> <chr>      <chr>      <chr>          <dbl> <chr>
#> 1 Qui-Gon J…    193    89 brown      fair       blue              92 male 
#> 2 Jango Fett    183    79 black      tan        brown             66 male 
#> 3 Jocasta Nu    167    NA white      fair       blue              NA fema…
#> 4 Zam Wesell    168    55 blonde     fair, gre… yellow            NA fema…
#> # ℹ 4 more rows
#> # ℹ 6 more variables: gender <chr>, homeworld <chr>, species <chr>,
#> #   films <list>, vehicles <list>, starships <list>

Use replace = TRUE to perform a bootstrap sample. If needed, you can weight the sample with the weight argument.

  • slice_min() and slice_max() select rows with highest or lowest values of a variable. Note that we first must choose only the values which are not NA.
starwars %>%
  filter(!is.na(height)) %>%
  slice_max(height, n = 3)
#> # A tibble: 3 × 14
#>   name       height  mass hair_color skin_color eye_color birth_year sex  
#>   <chr>       <int> <dbl> <chr>      <chr>      <chr>          <dbl> <chr>
#> 1 Yarael Po…    264    NA none       white      yellow            NA male 
#> 2 Tarfful       234   136 brown      brown      blue              NA male 
#> 3 Lama Su       229    88 none       grey       black             NA male 
#> # ℹ 6 more variables: gender <chr>, homeworld <chr>, species <chr>,
#> #   films <list>, vehicles <list>, starships <list>

Select columns with select()

Often you work with large datasets with many columns but only a few are actually of interest to you. select() allows you to rapidly zoom in on a useful subset using operations that usually only work on numeric variable positions:

# Select columns by name
starwars %>% select(hair_color, skin_color, eye_color)
#> # A tibble: 87 × 3
#>   hair_color skin_color  eye_color
#>   <chr>      <chr>       <chr>    
#> 1 blond      fair        blue     
#> 2 NA         gold        yellow   
#> 3 NA         white, blue red      
#> 4 none       white       yellow   
#> # ℹ 83 more rows
# Select all columns between hair_color and eye_color (inclusive)
starwars %>% select(hair_color:eye_color)
#> # A tibble: 87 × 3
#>   hair_color skin_color  eye_color
#>   <chr>      <chr>       <chr>    
#> 1 blond      fair        blue     
#> 2 NA         gold        yellow   
#> 3 NA         white, blue red      
#> 4 none       white       yellow   
#> # ℹ 83 more rows
# Select all columns except those from hair_color to eye_color (inclusive)
starwars %>% select(!(hair_color:eye_color))
#> # A tibble: 87 × 11
#>   name        height  mass birth_year sex   gender homeworld species films
#>   <chr>        <int> <dbl>      <dbl> <chr> <chr>  <chr>     <chr>   <lis>
#> 1 Luke Skywa…    172    77       19   male  mascu… Tatooine  Human   <chr>
#> 2 C-3PO          167    75      112   none  mascu… Tatooine  Droid   <chr>
#> 3 R2-D2           96    32       33   none  mascu… Naboo     Droid   <chr>
#> 4 Darth Vader    202   136       41.9 male  mascu… Tatooine  Human   <chr>
#> # ℹ 83 more rows
#> # ℹ 2 more variables: vehicles <list>, starships <list>
# Select all columns ending with color
starwars %>% select(ends_with("color"))
#> # A tibble: 87 × 3
#>   hair_color skin_color  eye_color
#>   <chr>      <chr>       <chr>    
#> 1 blond      fair        blue     
#> 2 NA         gold        yellow   
#> 3 NA         white, blue red      
#> 4 none       white       yellow   
#> # ℹ 83 more rows

There are a number of helper functions you can use within select(), like starts_with(), ends_with(), matches() and contains(). These let you quickly match larger blocks of variables that meet some criterion. See ?select for more details.

You can rename variables with select() by using named arguments:

starwars %>% select(home_world = homeworld)
#> # A tibble: 87 × 1
#>   home_world
#>   <chr>     
#> 1 Tatooine  
#> 2 Tatooine  
#> 3 Naboo     
#> 4 Tatooine  
#> # ℹ 83 more rows

But because select() drops all the variables not explicitly mentioned, it’s not that useful. Instead, use rename():

starwars %>% rename(home_world = homeworld)
#> # A tibble: 87 × 14
#>   name       height  mass hair_color skin_color eye_color birth_year sex  
#>   <chr>       <int> <dbl> <chr>      <chr>      <chr>          <dbl> <chr>
#> 1 Luke Skyw…    172    77 blond      fair       blue            19   male 
#> 2 C-3PO         167    75 NA         gold       yellow         112   none 
#> 3 R2-D2          96    32 NA         white, bl… red             33   none 
#> 4 Darth Vad…    202   136 none       white      yellow          41.9 male 
#> # ℹ 83 more rows
#> # ℹ 6 more variables: gender <chr>, home_world <chr>, species <chr>,
#> #   films <list>, vehicles <list>, starships <list>

Add new columns with mutate()

Besides selecting sets of existing columns, it’s often useful to add new columns that are functions of existing columns. This is the job of mutate():

starwars %>% mutate(height_m = height / 100)
#> # A tibble: 87 × 15
#>   name       height  mass hair_color skin_color eye_color birth_year sex  
#>   <chr>       <int> <dbl> <chr>      <chr>      <chr>          <dbl> <chr>
#> 1 Luke Skyw…    172    77 blond      fair       blue            19   male 
#> 2 C-3PO         167    75 NA         gold       yellow         112   none 
#> 3 R2-D2          96    32 NA         white, bl… red             33   none 
#> 4 Darth Vad…    202   136 none       white      yellow          41.9 male 
#> # ℹ 83 more rows
#> # ℹ 7 more variables: gender <chr>, homeworld <chr>, species <chr>,
#> #   films <list>, vehicles <list>, starships <list>, height_m <dbl>

We can’t see the height in meters we just calculated, but we can fix that using a select command.

starwars %>%
  mutate(height_m = height / 100) %>%
  select(height_m, height, everything())
#> # A tibble: 87 × 15
#>   height_m height name     mass hair_color skin_color eye_color birth_year
#>      <dbl>  <int> <chr>   <dbl> <chr>      <chr>      <chr>          <dbl>
#> 1     1.72    172 Luke S…    77 blond      fair       blue            19  
#> 2     1.67    167 C-3PO      75 NA         gold       yellow         112  
#> 3     0.96     96 R2-D2      32 NA         white, bl… red             33  
#> 4     2.02    202 Darth …   136 none       white      yellow          41.9
#> # ℹ 83 more rows
#> # ℹ 7 more variables: sex <chr>, gender <chr>, homeworld <chr>,
#> #   species <chr>, films <list>, vehicles <list>, starships <list>

dplyr::mutate() is similar to the base transform(), but allows you to refer to columns that you’ve just created:

starwars %>%
  mutate(
    height_m = height / 100,
    BMI = mass / (height_m^2)
  ) %>%
  select(BMI, everything())
#> # A tibble: 87 × 16
#>     BMI name       height  mass hair_color skin_color eye_color birth_year
#>   <dbl> <chr>       <int> <dbl> <chr>      <chr>      <chr>          <dbl>
#> 1  26.0 Luke Skyw…    172    77 blond      fair       blue            19  
#> 2  26.9 C-3PO         167    75 NA         gold       yellow         112  
#> 3  34.7 R2-D2          96    32 NA         white, bl… red             33  
#> 4  33.3 Darth Vad…    202   136 none       white      yellow          41.9
#> # ℹ 83 more rows
#> # ℹ 8 more variables: sex <chr>, gender <chr>, homeworld <chr>,
#> #   species <chr>, films <list>, vehicles <list>, starships <list>,
#> #   height_m <dbl>

If you only want to keep the new variables, use .keep = "none":

starwars %>%
  mutate(
    height_m = height / 100,
    BMI = mass / (height_m^2),
    .keep = "none"
  )
#> # A tibble: 87 × 2
#>   height_m   BMI
#>      <dbl> <dbl>
#> 1     1.72  26.0
#> 2     1.67  26.9
#> 3     0.96  34.7
#> 4     2.02  33.3
#> # ℹ 83 more rows

Change column order with relocate()

Use a similar syntax as select() to move blocks of columns at once

starwars %>% relocate(sex:homeworld, .before = height)
#> # A tibble: 87 × 14
#>   name           sex   gender homeworld height  mass hair_color skin_color
#>   <chr>          <chr> <chr>  <chr>      <int> <dbl> <chr>      <chr>     
#> 1 Luke Skywalker male  mascu… Tatooine     172    77 blond      fair      
#> 2 C-3PO          none  mascu… Tatooine     167    75 NA         gold      
#> 3 R2-D2          none  mascu… Naboo         96    32 NA         white, bl…
#> 4 Darth Vader    male  mascu… Tatooine     202   136 none       white     
#> # ℹ 83 more rows
#> # ℹ 6 more variables: eye_color <chr>, birth_year <dbl>, species <chr>,
#> #   films <list>, vehicles <list>, starships <list>

Summarise values with summarise()

The last verb is summarise(). It collapses a data frame to a single row.

starwars %>% summarise(height = mean(height, na.rm = TRUE))
#> # A tibble: 1 × 1
#>   height
#>    <dbl>
#> 1   175.

It’s not that useful until we learn the group_by() verb below.

Commonalities

You may have noticed that the syntax and function of all these verbs are very similar:

  • The first argument is a data frame.

  • The subsequent arguments describe what to do with the data frame. You can refer to columns in the data frame directly without using $.

  • The result is a new data frame

Together these properties make it easy to chain together multiple simple steps to achieve a complex result.

These five functions provide the basis of a language of data manipulation. At the most basic level, you can only alter a tidy data frame in five useful ways: you can reorder the rows (arrange()), pick observations and variables of interest (filter() and select()), add new variables that are functions of existing variables (mutate()), or collapse many values to a summary (summarise()).

Combining functions with %>%

The dplyr API is functional in the sense that function calls don’t have side-effects. You must always save their results. This doesn’t lead to particularly elegant code, especially if you want to do many operations at once. You either have to do it step-by-step:

a1 <- group_by(starwars, species, sex)
a2 <- select(a1, height, mass)
a3 <- summarise(a2,
  height = mean(height, na.rm = TRUE),
  mass = mean(mass, na.rm = TRUE)
)

Or if you don’t want to name the intermediate results, you need to wrap the function calls inside each other:

summarise(
  select(
    group_by(starwars, species, sex),
    height, mass
  ),
  height = mean(height, na.rm = TRUE),
  mass = mean(mass, na.rm = TRUE)
)
#> Adding missing grouping variables: `species`, `sex`
#> `summarise()` has grouped output by 'species'. You can override using the
#> `.groups` argument.
#> # A tibble: 41 × 4
#> # Groups:   species [38]
#>   species  sex   height  mass
#>   <chr>    <chr>  <dbl> <dbl>
#> 1 Aleena   male      79    15
#> 2 Besalisk male     198   102
#> 3 Cerean   male     198    82
#> 4 Chagrian male     196   NaN
#> # ℹ 37 more rows

This is difficult to read because the order of the operations is from inside to out. Thus, the arguments are a long way away from the function. To get around this problem, dplyr provides the %>% operator from magrittr. x %>% f(y) turns into f(x, y) so you can use it to rewrite multiple operations that you can read left-to-right, top-to-bottom (reading the pipe operator as “then”):

starwars %>%
  group_by(species, sex) %>%
  select(height, mass) %>%
  summarise(
    height = mean(height, na.rm = TRUE),
    mass = mean(mass, na.rm = TRUE)
  )

Patterns of operations

The dplyr verbs can be classified by the type of operations they accomplish (we sometimes speak of their semantics, i.e., their meaning). It’s helpful to have a good grasp of the difference between select and mutate operations.

Selecting operations

One of the appealing features of dplyr is that you can refer to columns from the tibble as if they were regular variables. However, the syntactic uniformity of referring to bare column names hides semantical differences across the verbs. A column symbol supplied to select() does not have the same meaning as the same symbol supplied to mutate().

Selecting operations expect column names and positions. Hence, when you call select() with bare variable names, they actually represent their own positions in the tibble. The following calls are completely equivalent from dplyr’s point of view:

# `name` represents the integer 1
select(starwars, name)
#> # A tibble: 87 × 1
#>   name          
#>   <chr>         
#> 1 Luke Skywalker
#> 2 C-3PO         
#> 3 R2-D2         
#> 4 Darth Vader   
#> # ℹ 83 more rows
select(starwars, 1)
#> # A tibble: 87 × 1
#>   name          
#>   <chr>         
#> 1 Luke Skywalker
#> 2 C-3PO         
#> 3 R2-D2         
#> 4 Darth Vader   
#> # ℹ 83 more rows

By the same token, this means that you cannot refer to variables from the surrounding context if they have the same name as one of the columns. In the following example, height still represents 2, not 5:

height <- 5
select(starwars, height)
#> # A tibble: 87 × 1
#>   height
#>    <int>
#> 1    172
#> 2    167
#> 3     96
#> 4    202
#> # ℹ 83 more rows

One useful subtlety is that this only applies to bare names and to selecting calls like c(height, mass) or height:mass. In all other cases, the columns of the data frame are not put in scope. This allows you to refer to contextual variables in selection helpers:

name <- "color"
select(starwars, ends_with(name))
#> # A tibble: 87 × 3
#>   hair_color skin_color  eye_color
#>   <chr>      <chr>       <chr>    
#> 1 blond      fair        blue     
#> 2 NA         gold        yellow   
#> 3 NA         white, blue red      
#> 4 none       white       yellow   
#> # ℹ 83 more rows

These semantics are usually intuitive. But note the subtle difference:

name <- 5
select(starwars, name, identity(name))
#> # A tibble: 87 × 2
#>   name           skin_color 
#>   <chr>          <chr>      
#> 1 Luke Skywalker fair       
#> 2 C-3PO          gold       
#> 3 R2-D2          white, blue
#> 4 Darth Vader    white      
#> # ℹ 83 more rows

In the first argument, name represents its own position 1. In the second argument, name is evaluated in the surrounding context and represents the fifth column.

For a long time, select() used to only understand column positions. Counting from dplyr 0.6, it now understands column names as well. This makes it a bit easier to program with select():

vars <- c("name", "height")
select(starwars, all_of(vars), "mass")
#> # A tibble: 87 × 3
#>   name           height  mass
#>   <chr>           <int> <dbl>
#> 1 Luke Skywalker    172    77
#> 2 C-3PO             167    75
#> 3 R2-D2              96    32
#> 4 Darth Vader       202   136
#> # ℹ 83 more rows

Mutating operations

Mutate semantics are quite different from selection semantics. Whereas select() expects column names or positions, mutate() expects column vectors. We will set up a smaller tibble to use for our examples.

df <- starwars %>% select(name, height, mass)

When we use select(), the bare column names stand for their own positions in the tibble. For mutate() on the other hand, column symbols represent the actual column vectors stored in the tibble. Consider what happens if we give a string or a number to mutate():

mutate(df, "height", 2)
#> # A tibble: 87 × 5
#>   name           height  mass `"height"`   `2`
#>   <chr>           <int> <dbl> <chr>      <dbl>
#> 1 Luke Skywalker    172    77 height         2
#> 2 C-3PO             167    75 height         2
#> 3 R2-D2              96    32 height         2
#> 4 Darth Vader       202   136 height         2
#> # ℹ 83 more rows

mutate() gets length-1 vectors that it interprets as new columns in the data frame. These vectors are recycled so they match the number of rows. That’s why it doesn’t make sense to supply expressions like "height" + 10 to mutate(). This amounts to adding 10 to a string! The correct expression is:

mutate(df, height + 10)
#> # A tibble: 87 × 4
#>   name           height  mass `height + 10`
#>   <chr>           <int> <dbl>         <dbl>
#> 1 Luke Skywalker    172    77           182
#> 2 C-3PO             167    75           177
#> 3 R2-D2              96    32           106
#> 4 Darth Vader       202   136           212
#> # ℹ 83 more rows

In the same way, you can unquote values from the context if these values represent a valid column. They must be either length 1 (they then get recycled) or have the same length as the number of rows. In the following example we create a new vector that we add to the data frame:

var <- seq(1, nrow(df))
mutate(df, new = var)
#> # A tibble: 87 × 4
#>   name           height  mass   new
#>   <chr>           <int> <dbl> <int>
#> 1 Luke Skywalker    172    77     1
#> 2 C-3PO             167    75     2
#> 3 R2-D2              96    32     3
#> 4 Darth Vader       202   136     4
#> # ℹ 83 more rows

A case in point is group_by(). While you might think it has select semantics, it actually has mutate semantics. This is quite handy as it allows to group by a modified column:

group_by(starwars, sex)
#> # A tibble: 87 × 14
#> # Groups:   sex [5]
#>   name       height  mass hair_color skin_color eye_color birth_year sex  
#>   <chr>       <int> <dbl> <chr>      <chr>      <chr>          <dbl> <chr>
#> 1 Luke Skyw…    172    77 blond      fair       blue            19   male 
#> 2 C-3PO         167    75 NA         gold       yellow         112   none 
#> 3 R2-D2          96    32 NA         white, bl… red             33   none 
#> 4 Darth Vad…    202   136 none       white      yellow          41.9 male 
#> # ℹ 83 more rows
#> # ℹ 6 more variables: gender <chr>, homeworld <chr>, species <chr>,
#> #   films <list>, vehicles <list>, starships <list>
group_by(starwars, sex = as.factor(sex))
#> # A tibble: 87 × 14
#> # Groups:   sex [5]
#>   name       height  mass hair_color skin_color eye_color birth_year sex  
#>   <chr>       <int> <dbl> <chr>      <chr>      <chr>          <dbl> <fct>
#> 1 Luke Skyw…    172    77 blond      fair       blue            19   male 
#> 2 C-3PO         167    75 NA         gold       yellow         112   none 
#> 3 R2-D2          96    32 NA         white, bl… red             33   none 
#> 4 Darth Vad…    202   136 none       white      yellow          41.9 male 
#> # ℹ 83 more rows
#> # ℹ 6 more variables: gender <chr>, homeworld <chr>, species <chr>,
#> #   films <list>, vehicles <list>, starships <list>
group_by(starwars, height_binned = cut(height, 3))
#> # A tibble: 87 × 15
#> # Groups:   height_binned [4]
#>   name       height  mass hair_color skin_color eye_color birth_year sex  
#>   <chr>       <int> <dbl> <chr>      <chr>      <chr>          <dbl> <chr>
#> 1 Luke Skyw…    172    77 blond      fair       blue            19   male 
#> 2 C-3PO         167    75 NA         gold       yellow         112   none 
#> 3 R2-D2          96    32 NA         white, bl… red             33   none 
#> 4 Darth Vad…    202   136 none       white      yellow          41.9 male 
#> # ℹ 83 more rows
#> # ℹ 7 more variables: gender <chr>, homeworld <chr>, species <chr>,
#> #   films <list>, vehicles <list>, starships <list>, height_binned <fct>

This is why you can’t supply a column name to group_by(). This amounts to creating a new column containing the string recycled to the number of rows:

group_by(df, "month")
#> # A tibble: 87 × 4
#> # Groups:   "month" [1]
#>   name           height  mass `"month"`
#>   <chr>           <int> <dbl> <chr>    
#> 1 Luke Skywalker    172    77 month    
#> 2 C-3PO             167    75 month    
#> 3 R2-D2              96    32 month    
#> 4 Darth Vader       202   136 month    
#> # ℹ 83 more rows